logo1 logo2
logo3 4
logo6
Online Store
Home Page
About Us
Services
Dyno Tuning
Brands
Contact Us
Shop Tour
Vehicle Gallery
House of Boost Blog
What's New
In the Press
Web Links
Free Downloads
Videos
Cars For Sale
Apparel


Aeromotive 1000-1700 hp
C5/C6 Fuel System

House of Boost finally has a solution to your fuel system needs. No more drilling your fuel tanks, no more risking pump failure in a twin pump set up, no more surge tanks, no more mess. House of Boost along with Aeromotive is proud to announce a complete drop in fuel system available for C6 and late C5 Corvettes.

While we were brainstorming plans for a custom in-tank setup for our HOB-built 1300hp C6 Z06, our local Aeromotive rep stopped by to see what we were up to and loved the idea of doing an in-tank setup for the Corvette market. So using our vehicle as a test bed, Aeromotive ran with the concept and developed a great setup that incorporates the factory jet siphon system.

The Aeromotive assembly gives you your choice of either an A1000, Eliminator, or Pro Series Pump. The best part is that it is a complete drop in assembly that still incorporates the factory jet siphon system. We took our time perfecting and testing this system to make sure we were bringing the most sophisticated fuel system to the Corvette market. You will not find another fuel system this clean, simple and effective.

The prototype of this fuel system was running an Eliminator pump and was tested on the cogged F2 powered C6 Z06 we built that made 1103 rwhp. When you apply an Aeromotive Fuel Pump Controller you can not hear the pump at idle even running an Eliminator. We are currently taking pre-orders on this assembly so give us a call today! This fuel system packaged together with our LSR Cog Drive is your ticket to the fast list!

MSRP:

A1000 In-Tank Fuel Pump Assembly Only:
$749
A1000 In-Tank Complete System: $2,120
-- Buy Now at our Online Store --


Eliminator In-Tank Fuel Pump Assembly Only: $934
Eliminator In-Tank Complete System:
$2,305
-- Buy Now at our Online Store --



Pro-Series In-Tank Fuel Pump Assembly Only:
$1,140
Pro-Series In-Tank Complete System:
$2,675
-- Buy Now at our Online Store --


What's included in the Assembly:
- In-Tank Fuel Pump with Inlet Filter
- Pressure Tube and Top Plate
- Fuel Level Bracket for Factory Fuel Level Sensor
- Passenger side Regulator Restictor Plug
- Jet Siphon Hose with Quick Disconnect (no cutting required)



What's included in the Complete System:
- In-Tank Fuel Pump Assembly
- Fuel Filter
- Fuel Filter Bracket
- Fuel Pump Speed Controller
- Fuel Pressure Regulator
- Inline Fuel Check Valve
- Fuel Rails
- Fuel Y-Block
- Pre-cut Fuel Lines with all fittings attached
- Fittings to connect fuel lines to the In-Tank Pump
- Complete diagram showing line & component routing


- A1000 supports 1000hp for Forced Induction, 1300hp N/A
- Eliminator supports 1400hp for Forced Induction, 1900hp N/A
- Pro-Series supports 1700hp for Forced Induction, 2200hp N/A












A1000 Assembly:
$749

Eliminator Assembly:
$934

Pro-Series Assembly:
$1,140



Complete System
with Fuel Line/Fittings
Starting At:
$2,120